Warrior Side Eject Tines
R&R Warrior tines remove a soil core which quickly exits the side of the tine through a precision machined slot. This slot is designed to avoid "plugging" that can occur using hollow tubular tines (especially the smaller diameters) in heavy soil conditions. These alloy side-eject tines are machined from special high-carbon alloy steel solid bar and heat treated to RC45-48 in our own heat-treating facility. Very popular for the multiple tine holders which fit all greens aerators.
R&R Warrior are available in all standard sizes but are especially popular in the smaller diameters for aerating in the summer months to relieve the stress on greens by allowing water, air and nutrients to easily flow into the root zone. The special tip design provides minimal disturbance resulting in play that can be resumed immediately.
| A - Tine Type | B - Tine Mounting Dia. | C - Tine Length | D - Tine Tip Outside (Hole) Dia. | E - Tine Tip Inside (Core) Dia. | F - Tine Wall Thickness | Manufacturer | R&R Part # | Price | |
|---|---|---|---|---|---|---|---|---|---|
 | Warrior Alloy Side-Eject | .375 in (9.5mm) | 5 in (127mm) | .625 in (15.9mm) | .500 in (12.7mm) | .065 in (1.7mm) | R&R Products | R201277 | |
 | Warrior Alloy Side-Eject | .375 in (9.5mm) | 5 in (127mm) | .535 in (13.6mm) | .400 in (10.2mm) | .065 in (1.7mm) | R&R Products | R201276 | |
 | Warrior Alloy Side-Eject | .375 in (9.5mm) | 5 in (127mm) | .450 in (11.4mm) | .315 in (8mm) | .065 in (1.7mm) | R&R Products | R201275 | |
 | Warrior Alloy Side-Eject | .375 in (9.5mm) | 4.375 in (111mm) | .315 in (8mm) | .157 in (4mm) | .078 in (2.0mm) | R&R Products | R201292 | |
 | Warrior Alloy Side-Eject | .375 in (9.5mm) | 4.375 in (111mm) | .276 in (7mm) | .157 in (4mm) | .060 in (1.5mm) | R&R Products | R201291 |
